It’s in the Details
We’ve created an Australian-built, solar chargeable, underground-ready, battery electric light vehicle (bELV) so that passionate leaders can demonstrate progress And mining companies can start their journey to Zero.
Safety in Design | Underground-Ready |
Low Total Cost of Ownership
About the ZED70 Ti
Base vehicle | |
---|---|
Chassis & Cab | Toyota LandCruiser 79 Series |
Passengers | (Dual Cab) 5 | Single Cab 2 |
Tray | Aluminium Tray | Galvanised Steel Tray |
GVM | 3,300kg |
Motor | |
---|---|
Type | 3 Phase Asynchronous with regenerative braking |
Emissions Control | Zero emissions |
Power | 200kW(peak) | 100kW(cont.) |
Torque | 1200Nm(peak) | 520Nm(cont.) |
Efficiency | 94.6%(peak) |
Batteries | |
---|---|
Capacity | 60Wh |
Depth of Discharge | 98% |
Life Cycle | 20,000 Cycles (-4,000,000kms) to 70% State of Health |
415V 3-phase Charge Time | 3 hrs |
DC - DC Charge Time | Less than 25 mins |
Electrical | |
---|---|
Tractive System Voltage | 750V |
Charging | 22kW On-board Charger - 415VAC 3-Phase Supply |
DC - DC Fast Charging | 160kW - External Charger |
Low Voltage Battery | Toyota | 12V Lead Acid |
Suspension & Drive-train | |
---|---|
Transfer Case | Toyota | 1:1, 1:2.41 |
Front Suspension | Toyota | Coil Spring |
Rear Suspension | Toyota | Leaf Spring |
Differential Ratios | Toyota | 3.909, 4.1, 4.3 |
Steering | Hydraulic Electric Pump |
Brakes | Toyota | Hydraulic Disc Brakes |
Ancillaries | |
---|---|
Heater | 5kW HV Battery Powered Unit |
Air-Conditioning Compressor | 4kW HV Battery Powered Unit |
Electrical Safety Systems | |
---|---|
ZED70 Ti | Isolator Switch |
Manual Service Disconnect |
|
Battery Management System |
|
Automatic Electrical Isolating Contractors |
|
Multiple Mechanical HV Isolators |
|
Fast Acting Fusable Links |
|
eBrake |
Features | |
---|---|
Vehicle System Display | 6° multimedia display, showing critical vehicles parameters |
Vehicle Corrosion Protection | HEPS - Hazardous Environment Protection System - Body Armor Protection Pack |
Australian Design Rules (ADR) approved, means the ZED70 Ti is permitted to be driven on public roads. ADR provides operators with assurance that the vehicle meets Australian safety standards.
Meaning safety, reliability and peace of mind.
Has passed validation testing and has been (ZED70 Ti) commissioned for underground mine use.
Surface battery charging controlled to provide regenerative braking during first descent.
Has passed validation testing and has been (ZED70 Ti) commissioned for underground mine use.
Surface battery charging controlled to provide regenerative braking during first descent.
At ZERO Automotive, we’re committed to Safety by Design. The ZED70 Ti LTO Battery Design features a boxed enclosure for added safety and risk reduction.
Battery TechnologiesWe’ve thought through a wide range of charging solutions that will keep the ZED70 Ti on the road. Range anxiety is a thing of the past with clear battery range monitoring.
Charging SolutionsLithium Titanate (Li2TiO3) — LTO
LTO batteries have very high level of safety and high power but are less energy dense. These cells have exceptional life cycle performance and do not degrade excessively when exposed to fast charging.
The LTO battery in the ZED70 Ti consists of individual 23Ah LTO cells combined into modules which provide a voltage of 330V, providing a capacity of 60kWh.
The LTO battery in the ZED70 Ti consists of individual 23Ah LTO cells combined into modules which provide a voltage of 330V, providing a capacity of 60kWh.
About out battery technologies
LTO Cell Properties | |
---|---|
Life for Core Lithium use Case | Approx. 20,000 to 80% SOH (Approx. 4million km or 70,000 operating hours) |
Maximum output | 194kW |
Storage capacity | 60kWh |
Rated Continuous Charge Rate | 480A |
Rated Continuous Discharge Rate | 480A |
Dimensions & Weight | Weight of Cells: 700kg Volume of cells: 0.395m3 Weight boxes + hardware: 120kg |
Recharge time | Standard 3 phase: 3hrs Fast Charging DC-DC: 30mins (non-standard) |
Recharge connection type | 3 Phase: Mennekes Type 2 DC-DC: CCS2 (non-standard) |
NCM Cell Properties | |
---|---|
Life for Core Lithium use Case | Approx. 1,200 cycles to 80% SOH (Approx. 360,000 km or 6,600 running hours) |
Maximum output | 150kW |
Rated Continuous Charge Rate | 240A |
Rated Continuous Discharge Rate | 240A |
Dimensions & Weight | Weight of Cells: 500kg Volume of Cells: 0.293m3 Weight boxes + hardware: 120kg |
We believe in doing better for our future.
And that future involves making better decisions
for our environment.
The original and the most affordable start on your journey to Zero emissions. Proudly assembled here in Australia, the ZED70 is built tough, safe and reliable.
To achieve Safety by Design, from the battery technology through to the parts used and the way our batteries are housed within the vehicle, we’ve left no stone unturned in our attempts to make a safe, reliable and renewable workhorse for any application.
ADR allows the vehicle to be driven on public roads. ADR provides operators with assurance that the vehicle meets Australian safety standards.
At ZERO Automotive, we’re committed to Safety by Design. The ZED70 NCM battery design features a boxed enclosure for added safety and risk reduction.
We’ve thought through a wide range of charging solutions that will keep the ZED70 on the road. Range anxiety is a thing of the past with clear battery range monitoring.